Blisstool LTC64 Podręcznik Użytkownika Pobierz pdf (Strona 45)

In mode ORE, with settings DISCR DEPTH = 0, DISCR LEVEL = 0 (mode All metals) and with

settings: DISCR DEPTH = 0, DISCR LEVEL = 10, BLISSTOOL LTC64X (THE BEAST) v6 as

behavior, resembles multi-period pulse induction metal detectors.

Described above settings in mode ORE, with recommended possible lower levels of DISCR

DEPTH relate mostly for very heavy terrain conditions, such as: highly mineralized terrains,

terrains with a high content of ore, highly mineralized sands. For lighter terrain conditions, in

mode ORE, may also be used the standard levels of discrimination (such as settings: DISCR

DEPTH = from 7 to 9, DISCR LEVEL = from 3 to 6), which are generally most suitable for mode

SOIL.

In mode ORE, to achieve the quality of discrimination available with standard levels of

discrimination in mode SOIL, DISCR DEPTH and DISCR LEVEL must be set to higher levels

compared to their standard setting in mode SOIL.

In mode SOIL, when work with high levels of GAIN is recommended work at possible lower

levels of DISCR DEPTH and DISCR LEVEL and conversely: when work with lower levels of GAIN

is admissible and work at higher levels of DISCR DEPTH and DISCR LEVEL.

In mode SOIL, settings GAIN = from 1 to 6 are best suitable for low and medium

mineralized terrains, while settings GAIN = from 7 to MAX are only suitable for low

mineralized terrains and are recommend only for very experienced users, which

through skillful precision setting of the sensitivity of the metal detector (through

potentiometers GAIN, THRESHOLD and SILENCER), with this extreme increased amplification

at GAIN = from 7 to MAX, can achieve better depth of detection in low mineralized terrains.

At work in manual ground balance mode (GROUND MODE = MAN), after each change

of the setting of potentiometer GAIN, need again to be made manual ground balance

of the metal detector (from potentiometer GROUND COARSE in mode ORE and from

potentiometers GROUND COARSE and GROUND FINE in mode SOIL).

12.2. Potentiometer GROUND FINE of v6

- At v5, v4, v3, v2i, v2 and v1, potentiometer GROUND FINE has only one function:

/1/ Serves as a further fine (precise) setting of the ground balance in a manual ground

balance working mode, ie for a fine and complete eliminate of the ground effect at work in a

manual ground balance working mode.

- At v6, potentiometer GROUND FINE has two functions:

/1/ Function identical to its function in v5, v4, v3, v2i, v2 and v1, i.e. serves as a further fine

(precise) setting of the ground balance in a manual ground balance working mode, ie for a fine

and complete eliminate of the ground effect at work in a manual ground balance working

mode;

/2/ Set the depth of detection in mode ORE.

In mode ORE (GAIN = MIN), the depth of detection is the lowest at GROUND FINE =

''-'' and the greatest at GROUND FINE = ''+'', i.e. with each higher level of GROUND

FINE, the depth of detection is better, but greatly increased depth of detection is not

recommended for very heavy terrain conditions, because this reducing the detection

speed and the recovery speed.

In mode ORE, in heavy terrain conditions, such as: highly mineralized terrains,

terrains with a high content of ore, highly mineralized sands, is recomended work

with settings GROUND FINE = from 1 to 5.

In mode ORE, BLISSTOOL LTC64X (THE BEAST) v6 has the highest detection speed

and the highest recovery speed with settings GROUND FINE = from 1 to 3. Therefore,

usually these settings are most suitable for extremely heavy terrain conditions.

BLISSTOOL LTC64X - User Guide (version EN201505131231) Page 45 of 62

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Blisstool LTC64 Podręcznik Użytkownika Strona 45

Komentarze do niniejszej Instrukcji